For sale: Mexican Bonds in Miami

MEXICAN BONDS IN MIAMI 
 
 I am the DIRECT SELLER for these bonds in Miami  

      

- BLACK EAGLES 1843 27500 pesos ..... 2 B                        

- QUEEN VICTORIA 1000 ......................800 MIO                

- PINK LADY LL 1899 .............................30 MIO                  

- 100 BLUEBERRY 1905 .........................80 MIO ( ALL THE 100 bonds )    (THIS WEEK  50 MIO !! ) 

       

ALL THE BONDS ARE ALREADY AUTHENTICATED AND WITH PASSCO

THE SALE OF THE BOND BLACK EAGLES  OR QUEEN VICTORIA CAN BE ONLY 2 DAY AFTER

TO CLOSE ONE OPERATION FOR SOME OF THE OTHER BONDS AND AFTER TOTAL PAIEMENT .

WE 'LL NOT SEND ANY PHOTO OF THE 27500 OR QV IN INTERNET 

IF INTEREST TO BUY IT , OUR LAWYER WILL ONLY CONFIRM IN THE INVITATION THAT WE'LL

SELL THE 27500 OR QV 2 DAYS AFTER THE PURCHASE AND PAYMENT OF THE 4 PRESIDENTS .   

IF YOU HAVE A REAL BUYER READY TO PROCEED I AM TO YOUR DISPOSITION 

THE PROCEDURE IS ONLY LIKE THIS :

1) Buyer must send me an email with:
- Its cis, passport and confirmation of the price offered.
- Confirmation that he is willing to book my flight Geneve Miami - Miami Geneve in first Classe
      And the Hotel Intercontinental Miami for 3 nights (time operation).

2) On receiving the mail, MY LAWYER  WILL CONFIRM WITH OFFICIAL LETTER ON PAPER HEAD SIGNED     
   The invitation to the TTM in his office in Miami and the planning

(PUTTING THAT IF THE BOND IS NOT IN THE TTM, 5 M $ IS PAID AS COMPENSATION FOR THE BUYER

    We will send an invitation that will state under perjury and penalty of 5M if they come and do not see the bond)

    I WILL SEND ALSO MY CIS AND PASSPORT AT THIS TIME

 3) At  reception of the invitation, the buyer must confirm all by signing and forwarding to me the invitation

    accompagnied with myflight ticket and the booking  for my Hotel . 

 4) TTM in the lawyer's office in Miami to close the operation where the buyer can control the bond, the PASSCO
      and if all is OK , BUYER MUST PAY IMMEDIATELY AT LEAST 5% OF THE AGREED PRICE
     AND THE ATTORNEY WILL PUT THE BOND IN A CUSTODY ACCOUNT FOR THE BUYER
    WHO HAVE 48 H (BANKING DAYS) ) TO PAY THE BALANCE .
    (IF BUYER PAY ALL IMMEDIATLY , THE BOND WILL BE RELEASE IN THE MOMENT)

Product List May 2012 - D2 - M100 - JP54 - D6 - LPG - LNG

Product	Minimum Order Maximum Order	Destination	Unit	Gross Price	Net Price
D2 GASOIL	50,000 MT per Month 1,000,000 MT per Month	CIF ASWP	MT	$740.00	$730.00
		FOB ROTTERDAM	MT	$720.00	$710.00
		FOB RUSSIA	MT	$710.00	$700.00
M100	200,000 MT per Month 500,000 MT per Month	CIF ASWP	MT	$460.00	$450.00
		FOB ROTTERDAM	MT	$440.00	$430.00
		FOB RUSSIA	MT	$430.00	$420.00
JP54	2,000,000 BBL per  Month 5,000,000 BBL per Month	CIF ASWP	BBL	$66.00	$56.00
		FOB ROTTERDAM	BBL	$63.44	$53.44
		FOB RUSSIA	BBL	$62.15	$52.15
D6 VIRGIN	75,000,000 Gallon/Month  150,000,000 Gallon/Month	CIF ASWP	Gallon	$2.45	$2.40
		FOB ROTTERDAM	Gallon	$2.38	$2.33
		FOB RUSSIA	Gallon	$2.32	$2.27
D6 BLENDED	75,000,000 Gallon/Month  150,000,000 Gallon/Month	CIF ASWP	Gallon	$2.28	$2.23
		FOB ROTTERDAM	Gallon	$2.21	$2.16
		FOB RUSSIA	Gallon	$2.15	$2.10
LPG	100,000 MT per Month 500,000 MT per Month	CIF ASWP	MT	$590.00	$580.00
		FOB ROTTERDAM	MT	$570.00	$560.00
		FOB RUSSIA	MT	$560.00	$550.00
LNG	100,000 MT per Month 500,000 MT per Month	CIF ASWP	MT	$650.00	$630.00
		FOB ROTTERDAM	MT	$630.00	$610.00
		FOB RUSSIA	MT	$620.00	$600.00

NOTE:

(1) Conversion factor from Metric Ton to Barrel = 7.8

(2) Conversion factor from Metric Ton to US Gallon = 302.6

(3) Presented prices can be modified without prior notification

CONTRACT PROCEDURE

1. BUYER issues LOI

2. SELLER sends FCO

3. BUYER approves, signs the FCO and send it back to SELLER plus an ICPO with full banking details and buyer title, nationality and passport number and a BCL (BCL is required only if MAZUT);

4. SELLER sends to BUYER a contract for review and amendment;

5. The Parties sign and seal the present Contract and exchange the copies electronically. The electronically exchanged copies will be legally binding until the hard copies are exchanged.

6. BUYER and SELLER lodge the contract and NCNDA/IMFPA to their respective banks;

7. Within 5 (Five) banking days, BUYER issues an irrevocable bank guarantee instrument in the format of any of the following forms –irrevocable BG or irrevocable MT760 or irrevocable SBLC or irrevocable DLC. The amount of the of the instrument will be 100% of the monthly shipment value of the contract and revolving for the contract duration;

8. Within 5 (Five) banking days, provides POP to BUYER's Bank (Copy of license to export, issued by the department of the Ministry of energy, Copy of approval to export, issued by the Department of the ministry of Justice, Copy of availability of product, Copy of refinery commitment to produce the product, Passport bargain number, Allocation passport certiWicate issued by the ministry of energy, Copy of port storage agreement, Copy of the charter party agreement(s) to transport the product to the discharge port);

9. Within 5 (Five) banking days, SELLER issues a 2% Performance Bond;

10. The SELLER informs the BUYER about the readiness for Shipment of monthly consignment;

11. Shipment commences as per Contract;

12. The SELLER undertakes delivery in accordance with the Contract terms;

13. For every delivery, SELLER issues a Commercial Invoice for buyer’s completion, signature and return;

14. SELLER supplies SGS Report, Tank Storage Receipt (TSR) and Dip Test Authorization to the BUYER when the shipment is at discharge port;

15. BUYER verifies documents, dips and pay immediately by agreed instrument (MT103);

16. SELLER transfers Title to BUYER's designated Bank after confirmation of payment; 

SPOT PROCEDURE

1. BUYER issues LOI

2. SELLER sends FCO

3. BUYER approves, signs the FCO and send it back to SELLER plus an ICPO with full banking details and buyer title, nationality and passport number and a BCL (BCL is required only if MAZUT);

4. SELLER issues the Commercial Invoice (CI) and the Commitment Letter (CL) for signature and seal by the BUYER;

5. BUYER signs and seals the Commercial Invoice (CI) and returns it to the SELLER;

6. BUYER and SELLER lodge the FCO, CI and NCNDA/IMFPA to their respective banks;

7. Within 5 (Five) banking days, BUYER issues an irrevocable bank guarantee instrument in the format of any of the following forms –irrevocable BG or irrevocable MT760 or irrevocable irrevocable SBLC or irrevocable DLC. The amount of the of the instrument will be 100% of the SPOT shipment;

8. Within 5 (Five) banking days, SELLER provides full POP to BUYER's Bank. The POP will include: Copy of license to export, issued by the department of the Ministry of energy, Copy of approval to export, issued by the Department of the ministry of Justice, Copy of availability of product, Copy of refinery commitment to produce the product, Passport bargain number, Allocation passport certificate issued by the ministry of energy, Copy of Port Storage Agreement;

9. Within 5 (Five) banking days, SELLER informs the BUYER when the product will be available for lifting;

10. SELLER supplies SGS Report, Tank Storage Receipt (TSR) and Dip Test Authorization to the BUYER when the shipment is at discharge port;

11. BUYER verifies documents, dips and pay immediately by agreed instrument (MT103);

12. SELLER transfers Title to BUYER's designated Bank after confirmation of payment;

Note:

(1) From now on, if an ICPO, LOI, RWA, or BCL is issued and the document is not real, the Seller will be able to inform the FBI, ICC, and INTERPOL. In addition, after an FCO is sent to the Buyer, there should be a formal answer to Seller from Buyer.

(2) Any issued SCO or FCO will be addressed only to the buyer; no other names will be accepted. In case of fraudulent usage, the soliciting company indicated on the FCO will be reported to the FBI, ICC, and INTERPOL.

(3) Any offer (SCO, FOC) sent by the seller has 7 days validity from date of issuing.

(4) If there’s no response from the Buyer in a timely manner, the buying company will be reported to the FBI, ICC, and INTERPOL.

(5) When signed by both parties, Full Corporate Offer, Commercial Invoice and Contract are legally binding all the parties as per the terms and conditions indicated in these documents. Any non-performing buyer will be systematically reporting by the seller to the FBI, ICC, and INTERPOL.

PLEASE ASK FOR SPECIFICATION OF:
- D2
- JP54
- D6 Virgin
- Mazut Generic
- Etc

We offer a stock-lot of Nylon Cable ties (Zip ties, Tie-Raps, Ty-Raps) in EU

We offer a stock-lot of Nylon Cable ties (Zip ties, Tie-Raps, Ty-Raps) in EU. 

No geographical restrictions. 

Total quantity almost 3.5 mln pcs (~8 000 kg).

Price is EUR2.5/kg to buy it all only! 

For example, pack of 100 pcs of 140 mm x 3.6 mm Tie-Raps costs EUR0.16/pack! 

100Ч2.5 natural = 378 packs

140Ч3.6 natural = 2190 packs

140Ч3.6 black = 5961 packs

200Ч3.6 natural = 2822 packs

200Ч3.6 black = 4069 packs

200Ч4.8 natural = 5955 packs

200Ч4.8 black = 1044 packs

292Ч7.6 natural = 638 packs

300Ч4.8 natural = 371 packs

300Ч4.8 black = 88 packs

368Ч4.8 natural = 3962 packs

368Ч4.8 black = 1631 packs

368Ч7.6 natural = 4371 packs

100 pc/pack

We buy coal for China

Looking for coal (all sources including Indonesia and even Australia).
Minimum Quality: 6100/6300.
Quantity: 80.000x12 (even more).
The buyer is already working with three suppliers who can not keep up with demand.
Target Price (max): $ 85 CIF China (price offered by other providers).

The supplier will pay commissions.
We want to work with suppliers directly (or agents proven).

Your Wire Drawing Die & P.C.D. Die supplier with superior high quality (tolerance within 1 micron)

We are the most professional wire die and PCD dire maker from Taiwan.

Our tolerance is within 5 micron

We have many calibrate and measuring processes in our quality control system to make sure the durability of our Wire Die and P.C.D. Die is much higher than our competitors.

This is why our customers' satisfaction is so high.

These processes are

1.    Die hole calibration

To control the precise of the die hole.

2.    Wire Drawing through

To double confirm the precise of the die hole and make the smoothness of the die hole.

3.    Laser micrometer measuring

To make sure the accuracy of the die hole.

4.    Elongation measuring

To increase the wire drawing speed and durability of our wire die.

5.    Die profile measuring

To make sure the shape of the cone in the die is within our tollerance.

Your Excellency may take a look at the attachment to see the testing report to testify our quality.

Regarding our manufacturing process.

The followings is our manufacturing process:

1.    Diamond inspection

Weilly Die are made with diamonds close to gem grade, which are checked under microscope by more than 100X material magnification.

Any impurities, crack and spots could be easily detected and rejected.

An orthoscope detects the internal-stress, since abnormal internal-stress will cause die cracking during the wire die manufacturing process.

2.    Diamond setting

Putting a center-marked diamond toward the turning casing is the best solution for extra center setting of diamond in the casing.

3.    Metal power filling

By using an automatically filling machine efficiently and precisely, filling a constant amount of mixed sintering power into casing.

4.    Reinforcement

By using an automatic machine complete front and back cones two parallel flats.

5.    Coning

By using an automatic turning machine complete front and back cones and two parallel flats.

6.    Cylindrical grinding

To make sure the precise dimension and roundness of the casing, every casing should be grounded by centerless grinding machine to tightly control the tolerance within 5 micron.

7.    Laser drilling/EDM

The precision and consistency of our die profiling has been improved dramatically since we purchased a state of the art laser die drilling unit. Double sided profile drilling is achieved by this most update laser drilling machine.

8.    Die shaping and polishing

An advanced ultrasonic die working machine ensure the accurate die profile and good surface finish.

9.    Hole calibration

A wire lapping machine is used for controlling the precise tolerance of the die hole.

We are looking for new cooperation around the world at this moment.

Should you have any question about our products, please contact us anytime.

Absolutely you will find something fulfill your need.

Or you can check the attachment our products brochures to see what we can offer you.

We do believe we can create a win-win situation for both sides as long as we have come to a cooperation consensus.

"Customers' satisfaction is our guarantee" this is our believe and what we are for!